NEW 5930-689 Norton Door Operator Low Energy Push Side of Door, Double Lever Arm

  

5930 Norton Door Operator Low Energy Stop (Push) Side of Door, Standard - Duty, Double Lever Arm. Stop (Push) Side of Door Standard - Duty Double Lever Arm. 5930-689: STOP (PUSH) SIDE OF DOOR 3 - Standard-Duty Double Lever Arm 110° maximum door swing Reveals 2-3/4" to 5-3/4" (70 to 146mm).

An auxiliary door stop is required for these applications. Ease of installation and setup: - Simple instructions - "One touch" programming. Application versatility and ease of adjustment: - Non-handed units - Push- or pull-side mounting - Interfaces with electric hardware - Integrates with access control system.

Operation startup options: - Wall switches - Motion sensor - Radio frequency device - Push and Go - Presence Detector input - Sync cable for double doors; synchronizes closing of two operators. Power Assist - when unit is activated, it allows the door to be opened manually with a force less than 5 lbs. Push and Go (selectable) - as the door is manually opened, the operator "senses" movement and opens door to the full-open position. Obstruction Detection - Open - door closes if it hits an obstruction while opening - Close (Stop on Stall) - door will stop once it hits an obstruction and rest against the obstruction until obstruction is removed. Motor Startup Delay - delays operator opening.

Infinite Hold Open - door will hold open at set position until power is turned off. Power Latch (selectable) - increases latch power. Selector mode switch (3 position).

Off - disables signal inputs. On - activates signal inputs. Hold Open - activates the unit to the hold open position.

Power Input: 120 VAC, 60 Hz (+10%, -15%) Current draw. Americans with Disabilities Act (ADA).